<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 8454] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>2.23137283325195</x>
    <y>0</y>
    <z>8.30587577819824</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>1</x>
    <y>0</y>
    <z>0</z>
  </AxisAsymmetric>
  <MarkerFilename>MARKER.stl</MarkerFilename>
  <DisplayInformation>NewAncorvis - Direct Straumann®</DisplayInformation>
  <IsWithInterface>false</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <Keyword>NewAncorvis_Direct_STR-ALL</Keyword>
  <SupportOrientation>-1</SupportOrientation>
  <Supplier>New Ancorvis srl</Supplier>
  <SupplierLink>www.newancorvis.eu</SupplierLink>
  <SupplierVersion>2025-1</SupplierVersion>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <SupplierV4IconFilename>NA_logo.png</SupplierV4IconFilename>
  <TypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>Bone SC ø2.9 [NA AQ A302]</DisplayInformation>
      <Keyword>BoneSC29NAAQA302</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.58831787109375</x>
        <y>-0.029191255569458008</y>
        <z>8.5350418090820313</z>
      </RegistrationClickCenter>
      <MarkerFilename>MarkerAQsmall_2.1.stl</MarkerFilename>
      <DisplayInformation>Bone SC ø2.9 [NA AQsmall A802]</DisplayInformation>
      <Keyword>BoneSC29NAAQsmallA802</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-0.8415374755859375</x>
        <y>-1.2315635681152344</y>
        <z>10.715854644775391</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-0.70710696000044726</x>
        <y>-0.70710660237260259</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>S_D1_Straumann_SC_025.0077_45.stl</MarkerFilename>
      <DisplayInformation>Bone SC ø2.9 [Straumann® Metal SB 025.0077]</DisplayInformation>
      <Keyword>BoneSC29StraumannMetalSB0250077</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-0.9741058349609375</x>
        <y>-1.0133209228515625</y>
        <z>7.4938793182373047</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-0.70712327205014291</x>
        <y>-0.70709028993834988</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>StraumannSC.stl</MarkerFilename>
      <DisplayInformation>Bone SC ø2.9 [Straumann® Mono SB 025.0025]</DisplayInformation>
      <Keyword>BoneSC29StraumannMonoSB0250025</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.05792236328125</x>
        <y>1.0633926391601563</y>
        <z>8.64462947845459</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0.70710627454689823</x>
        <y>0.707107287825834</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>Medentika_Scanbody_L1420_z.stl</MarkerFilename>
      <DisplayInformation>Bone SC ø2.9 [Medentika® L 1420]</DisplayInformation>
      <Keyword>BoneSC29MedentikaL1420</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.75</x>
        <y>-0.010735288262367249</y>
        <z>7.6721744537353516</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>A-STR-B-L-SC-2.9.stl</MarkerFilename>
      <DisplayInformation>Bone SC ø2.9 [Arum® B172]</DisplayInformation>
      <Keyword>BoneSC29ArumB172</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-SBLSC290.stl</SupportFilename>
          <ScrewFilename>Vm-SBLSC290.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ImplantFilename>J-330844_an.stl</ImplantFilename>
      <DisplayInformation>Bone NC ø3.3 [NA AQ A046]</DisplayInformation>
      <Keyword>BoneNC33NAAQA046</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>241612.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL330.stl</SupportFilename>
          <ScrewFilename>241614.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL330.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL330.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA_BONEL_np.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5037002563476563</x>
        <y>-0.039045810699462891</y>
        <z>8.7888908386230469</z>
      </RegistrationClickCenter>
      <MarkerFilename>MarkerAQsmall_2.0.stl</MarkerFilename>
      <ImplantFilename>J-330844_an.stl</ImplantFilename>
      <DisplayInformation>Bone NC ø3.3 [NA AQsmall A546]</DisplayInformation>
      <Keyword>BoneNC33NAAQsmallA546</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>241612.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL330.stl</SupportFilename>
          <ScrewFilename>241614.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL330.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL330.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA_BONEL_np.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0.99975143776004149</x>
        <y>-0.022294902931609087</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>MarkerSR_8mm.stl</MarkerFilename>
      <ImplantFilename>J-330844_an.stl</ImplantFilename>
      <DisplayInformation>Bone NC ø3.3 [NA ScanReply SR046P]</DisplayInformation>
      <Keyword>BoneNC33NAScanReplySR046P</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL330.stl</SupportFilename>
          <ScrewFilename>241614.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL330.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL330.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA_BONEL_np.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.5</x>
        <y>0.0086660385131835938</y>
        <z>10.840908050537109</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>S_D1_Straumann_NC_025.0078.stl</MarkerFilename>
      <ImplantFilename>J-330844_an.stl</ImplantFilename>
      <DisplayInformation>Bone NC ø3.3 [Straumann® Metal SB 025.0078]</DisplayInformation>
      <Keyword>BoneNC33StraumannMetalSB0250078</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>241612.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL330.stl</SupportFilename>
          <ScrewFilename>241614.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL330.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL330.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA_BONEL_np.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.407318115234375</x>
        <y>-0.0476689338684082</y>
        <z>7.824254035949707</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>StraumannNC.stl</MarkerFilename>
      <ImplantFilename>J-330844_an.stl</ImplantFilename>
      <DisplayInformation>Bone NC ø3.3 [Straumann® Mono SB 025.2915]</DisplayInformation>
      <Keyword>BoneNC33StraumannMonoSB0252915</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>241612.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL330.stl</SupportFilename>
          <ScrewFilename>241614.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL330.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL330.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA_BONEL_np.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.55999755859375</x>
        <y>0.014878749847412109</y>
        <z>7.0304632186889648</z>
      </RegistrationClickCenter>
      <MarkerFilename>Scan_Adapter_L1400.stl</MarkerFilename>
      <ImplantFilename>J-330844_an.stl</ImplantFilename>
      <DisplayInformation>Bone NC ø3.3 [Medentika® L 1400]</DisplayInformation>
      <Keyword>BoneNC33MedentikaL1400</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>241612.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL330.stl</SupportFilename>
          <ScrewFilename>241614.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL330.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL330.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA_BONEL_np.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8990020751953125</x>
        <y>-0.00370025634765625</y>
        <z>6.2527618408203125</z>
      </RegistrationClickCenter>
      <MarkerFilename>52.043_Intraoral.stl</MarkerFilename>
      <ImplantFilename>J-330844_an.stl</ImplantFilename>
      <DisplayInformation>Bone NC ø3.3 [DESS® 52.043]</DisplayInformation>
      <Keyword>BoneNC33DESS52043</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>241612.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL330.stl</SupportFilename>
          <ScrewFilename>241614.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL330.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL330.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA_BONEL_np.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.3199386596679688</x>
        <y>-0.17004489898681641</y>
        <z>10.48610782623291</z>
      </RegistrationClickCenter>
      <MarkerFilename>c19249.stl</MarkerFilename>
      <ImplantFilename>J-330844_an.stl</ImplantFilename>
      <DisplayInformation>Bone NC ø3.3 [ELOS® IO 4A-A]</DisplayInformation>
      <Keyword>BoneNC33ELOSIO4AA</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>241612.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL330.stl</SupportFilename>
          <ScrewFilename>241614.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL330.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL330.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA_BONEL_np.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.75</x>
        <y>-0.0033845901489257813</y>
        <z>7.7831497192382813</z>
      </RegistrationClickCenter>
      <MarkerFilename>A-STR-B-L-NC-3.3.stl</MarkerFilename>
      <ImplantFilename>J-330844_an.stl</ImplantFilename>
      <DisplayInformation>Bone NC ø3.3 [Arum® B058_01]</DisplayInformation>
      <Keyword>BoneNC33ArumB05801</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>241612.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLNC330.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLNC330.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL330.stl</SupportFilename>
          <ScrewFilename>241614.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL330.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLNC330.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL330.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA_BONEL_np.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ImplantFilename>T-410844_an.stl</ImplantFilename>
      <DisplayInformation>Bone RC ø4.1 [NA AQ A048]</DisplayInformation>
      <Keyword>BoneRC41NAAQA048</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL410.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.55657958984375</x>
        <y>-0.10176849365234375</y>
        <z>8.6302528381347656</z>
      </RegistrationClickCenter>
      <MarkerFilename>MarkerAQsmall_2.0.stl</MarkerFilename>
      <ImplantFilename>T-410844_an.stl</ImplantFilename>
      <DisplayInformation>Bone RC ø4.1 [NA AQsmall A548]</DisplayInformation>
      <Keyword>BoneRC41NAAQsmallA548</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL410.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>MarkerSR_8mm.stl</MarkerFilename>
      <ImplantFilename>T-410844_an.stl</ImplantFilename>
      <DisplayInformation>Bone RC ø4.1 [NA ScanReply SR048P]</DisplayInformation>
      <Keyword>BoneRC41NAScanReplySR048P</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL410.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.6199951171875</x>
        <y>-0.033039093017578125</y>
        <z>10.685051918029785</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>S_D1_Straumann_RC_025.0079.stl</MarkerFilename>
      <ImplantFilename>T-410844_an.stl</ImplantFilename>
      <DisplayInformation>Bone RC ø4.1 [Straumann® Metal SB 025.0079]</DisplayInformation>
      <Keyword>BoneRC41StraumannMetalSB0250079</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL410.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.6790542602539063</x>
        <y>0.064418792724609375</y>
        <z>8.0812950134277344</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>StraumannRC.stl</MarkerFilename>
      <ImplantFilename>T-410844_an.stl</ImplantFilename>
      <DisplayInformation>Bone RC ø4.1 [Straumann® Mono SB 025.4915]</DisplayInformation>
      <Keyword>BoneRC41StraumannMonoSB0254915</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL410.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.55999755859375</x>
        <y>-0.0336451530456543</y>
        <z>7.194969654083252</z>
      </RegistrationClickCenter>
      <MarkerFilename>Scan_Adapter_L1410.stl</MarkerFilename>
      <ImplantFilename>T-410844_an.stl</ImplantFilename>
      <DisplayInformation>Bone RC ø4.1 [Medentika® L 1410]</DisplayInformation>
      <Keyword>BoneRC41MedentikaL1410</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL410.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8989944458007813</x>
        <y>0.0010706186294555664</y>
        <z>6.255927562713623</z>
      </RegistrationClickCenter>
      <MarkerFilename>52.044_Intraoral.stl</MarkerFilename>
      <ImplantFilename>T-410844_an.stl</ImplantFilename>
      <DisplayInformation>Bone RC ø4.1 [DESS® 52.044]</DisplayInformation>
      <Keyword>BoneRC41DESS52044</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL410.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5257492065429688</x>
        <y>-0.010235786437988281</y>
        <z>10.28810977935791</z>
      </RegistrationClickCenter>
      <MarkerFilename>c19250.stl</MarkerFilename>
      <ImplantFilename>T-410844_an.stl</ImplantFilename>
      <DisplayInformation>Bone RC ø4.1 [ELOS® IO 4A-B]</DisplayInformation>
      <Keyword>BoneRC41ELOSIO4AB</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL410.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.9000015258789063</x>
        <y>-0.010031700134277344</y>
        <z>7.7344789505004883</z>
      </RegistrationClickCenter>
      <MarkerFilename>A-STR-B-L-RC-4.1_4.8.stl</MarkerFilename>
      <ImplantFilename>T-410844_an.stl</ImplantFilename>
      <DisplayInformation>Bone RC ø4.1 [Arum® B059_01]</DisplayInformation>
      <Keyword>BoneRC41ArumB05901</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SBLRC410.stl</SupportFilename>
          <InterfaceFilename>LINK-Z-SBLRC410.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vm-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-BONEL410.stl</SupportFilename>
          <ScrewFilename>Vmi-SBLRC410.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-BONEL410.stl</SupportFilename>
          <InterfaceFilename>LINK-ZB-BOCCOLA.stl</InterfaceFilename>
          <ScrewFilename>271632.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>Tissue NN EXT ø3.5 [NA AQ A038]</DisplayInformation>
      <Keyword>TissueNNEXT35NAAQA038</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SNNEC370.stl</SupportFilename>
          <ScrewFilename>272022.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SNNEC370.stl</SupportFilename>
          <ScrewFilename>Vmi-SNNEC370.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SNNEC370.stl</SupportFilename>
          <ScrewFilename>271831.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot</DisplayInformation>
          <Keyword>ZirkNoRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNN350.stl</SupportFilename>
          <ScrewFilename>271822.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-SNNEC370.stl</SupportFilename>
          <ScrewFilename>Vmi-SNNEC370.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-STRAUNN350.stl</SupportFilename>
          <ScrewFilename>271831.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.3506393432617188</x>
        <y>-0.5811614990234375</y>
        <z>7.7887449264526367</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-0.9238797244557384</x>
        <y>-0.38268296896986276</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>S_D NN.stl</MarkerFilename>
      <DisplayInformation>Tissue NN EXT ø3.5 [Straumann® Mono SB 048.167]</DisplayInformation>
      <Keyword>TissueNNEXT35StraumannMonoSB048167</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SNNEC370.stl</SupportFilename>
          <ScrewFilename>272022.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SNNEC370.stl</SupportFilename>
          <ScrewFilename>Vmi-SNNEC370.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SNNEC370.stl</SupportFilename>
          <ScrewFilename>271831.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot</DisplayInformation>
          <Keyword>ZirkNoRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNN350.stl</SupportFilename>
          <ScrewFilename>271822.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-SNNEC370.stl</SupportFilename>
          <ScrewFilename>Vmi-SNNEC370.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-STRAUNN350.stl</SupportFilename>
          <ScrewFilename>271831.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.75</x>
        <y>-0.01248757541179657</y>
        <z>7.4151611328125</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>A-STR-SynOcta-T-L-NN-3.5.stl</MarkerFilename>
      <DisplayInformation>Tissue NN EXT ø3.5 [Arum® B121]</DisplayInformation>
      <Keyword>TissueNNEXT35ArumB121</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-SNNEC370.stl</SupportFilename>
          <ScrewFilename>272022.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-SNNEC370.stl</SupportFilename>
          <ScrewFilename>Vmi-SNNEC370.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-SNNEC370.stl</SupportFilename>
          <ScrewFilename>271831.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot</DisplayInformation>
          <Keyword>ZirkNoRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNN350.stl</SupportFilename>
          <ScrewFilename>271822.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-SNNEC370.stl</SupportFilename>
          <ScrewFilename>Vmi-SNNEC370.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-STRAUNN350.stl</SupportFilename>
          <ScrewFilename>271831.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>Tissue NNC ø3.3 [NA AQ A228]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueNNC33NAAQA228</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRNNC33.stl</SupportFilename>
          <ScrewFilename>241626.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRNNC33.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vm-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.3999710083007813</x>
        <y>0.00051403045654296875</y>
        <z>8.2608575820922852</z>
      </RegistrationClickCenter>
      <MarkerFilename>S_D1_Straumann_NNC_048.383_45.stl</MarkerFilename>
      <DisplayInformation>Tissue NNC ø3.3 [Straumann® Metal SB 048.383]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueNNC33StraumannMetalSB048383</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRNNC33.stl</SupportFilename>
          <ScrewFilename>241626.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRNNC33.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vm-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.4191665649414063</x>
        <y>0.09714508056640625</y>
        <z>7.5688791275024414</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>StraumannNNC.stl</MarkerFilename>
      <DisplayInformation>Tissue NNC ø3.3 [Straumann® Mono SB 048.173]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueNNC33StraumannMonoSB048173</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRNNC33.stl</SupportFilename>
          <ScrewFilename>241626.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRNNC33.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vm-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.529998779296875</x>
        <y>0.029982089996337891</y>
        <z>7.8839645385742188</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>Medentika_Scanbody_N1430_z_neue Ausrichtung_2021.stl</MarkerFilename>
      <DisplayInformation>Tissue NNC ø3.3 [Medentika® N 1430]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueNNC33MedentikaN1430</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRNNC33.stl</SupportFilename>
          <ScrewFilename>241626.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRNNC33.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vm-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8990020751953125</x>
        <y>-0.0058546066284179688</y>
        <z>5.8560624122619629</z>
      </RegistrationClickCenter>
      <MarkerFilename>52.070_Intraoral.stl</MarkerFilename>
      <DisplayInformation>Tissue NNC ø3.3 [DESS® 52.070]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueNNC33DESS52070</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRNNC33.stl</SupportFilename>
          <ScrewFilename>241626.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRNNC33.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vm-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0.033251047134399414</x>
        <y>1.315521240234375</y>
        <z>9.4835195541381836</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0</x>
        <y>1</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>c19220.stl</MarkerFilename>
      <DisplayInformation>Tissue NNC ø3.3 [ELOS® IO 4C-A]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueNNC33ELOSIO4CA</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRNNC33.stl</SupportFilename>
          <ScrewFilename>241626.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRNNC33.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vm-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.75</x>
        <y>-0.019714310765266418</y>
        <z>7.3994178771972656</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>A-STR-SynOcta-T-L-NNC-3.5.stl</MarkerFilename>
      <DisplayInformation>Tissue NNC ø3.3 [Arum® B147]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueNNC33ArumB147</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRNNC33.stl</SupportFilename>
          <ScrewFilename>241626.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRNNC33.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vm-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRAUNNC.stl</SupportFilename>
          <ScrewFilename>Vmi-STRNNC33.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>Tissue RN ø4.8 [NA AQ A273]</DisplayInformation>
      <Keyword>TissueRN48NAAQA273</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL480new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL480.stl</InterfaceFilename>
          <ScrewFilename>272026.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-D.stl</SupportFilename>
          <ScrewFilename>272017.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0</x>
        <y>0</y>
        <z>-8.55</z>
      </RegistrationClickCenter>
      <MarkerFilename>MarkerSR_8mm_StrTL48.stl</MarkerFilename>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>Tissue RN ø4.8 [NA ScanReply SR273P]</DisplayInformation>
      <Keyword>TissueRN48NAScanReplySR273P</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-D.stl</SupportFilename>
          <ScrewFilename>272017.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.689788818359375</x>
        <y>-0.16259288787841797</y>
        <z>8.2465095520019531</z>
      </RegistrationClickCenter>
      <MarkerFilename>S_D1_Straumann_RN_048384_22.5+180.stl</MarkerFilename>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>Tissue RN ø4.8 [Straumann® Metal SB 048.384]</DisplayInformation>
      <Keyword>TissueRN48StraumannMetalSB048384</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL480new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL480.stl</InterfaceFilename>
          <ScrewFilename>272026.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-D.stl</SupportFilename>
          <ScrewFilename>272017.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.02740478515625</x>
        <y>-0.093453407287597656</y>
        <z>7.3325839042663574</z>
      </RegistrationClickCenter>
      <MarkerFilename>StraumannRN.stl</MarkerFilename>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>Tissue RN ø4.8 [Straumann® Mono SB 048.168]</DisplayInformation>
      <Keyword>TissueRN48StraumannMonoSB048168</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL480new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL480.stl</InterfaceFilename>
          <ScrewFilename>272026.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-D.stl</SupportFilename>
          <ScrewFilename>272017.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.7600021362304688</x>
        <y>0.03861236572265625</y>
        <z>7.2380580902099609</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>Scan_Adapter_N1410.stl</MarkerFilename>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>Tissue RN ø4.8 [Medentika® N 1410]</DisplayInformation>
      <Keyword>TissueRN48MedentikaN1410</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL480new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL480.stl</InterfaceFilename>
          <ScrewFilename>272026.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-D.stl</SupportFilename>
          <ScrewFilename>272017.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8961944580078125</x>
        <y>-0.024261474609375</y>
        <z>5.6993293762207031</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0.96641877539803289</x>
        <y>-0.25697227585513294</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>50009_Intraoral.stl</MarkerFilename>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>Tissue RN ø4.8 [DESS® 50.009]</DisplayInformation>
      <Keyword>TissueRN48DESS50009</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL480new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL480.stl</InterfaceFilename>
          <ScrewFilename>272026.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-D.stl</SupportFilename>
          <ScrewFilename>272017.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0.16212654113769531</x>
        <y>1.5532302856445313</y>
        <z>9.2890529632568359</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0</x>
        <y>1</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>c19219.stl</MarkerFilename>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>Tissue RN ø4.8 [ELOS® IO 4B-A]</DisplayInformation>
      <Keyword>TissueRN48ELOSIO4BA</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL480new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL480.stl</InterfaceFilename>
          <ScrewFilename>272026.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-D.stl</SupportFilename>
          <ScrewFilename>272017.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.9000015258789063</x>
        <y>-0.058299541473388672</y>
        <z>7.4533753395080566</z>
      </RegistrationClickCenter>
      <MarkerFilename>A-STR-SynOcta-T-L-RN-4.8.stl</MarkerFilename>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>Tissue RN ø4.8 [Arum® B060_00]</DisplayInformation>
      <Keyword>TissueRN48ArumB06000</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL480no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL480new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL480.stl</InterfaceFilename>
          <ScrewFilename>272026.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1231-D.stl</SupportFilename>
          <ScrewFilename>272017.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ImplantFilename>Q-650884-0.75_an.stl</ImplantFilename>
      <DisplayInformation>Tissue WN ø6.5 [NA AQ A274]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueWN65NAAQA274</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL650new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL650.stl</InterfaceFilename>
          <ScrewFilename>272024.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-D.stl</SupportFilename>
          <ScrewFilename>272020.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.1999969482421875</x>
        <y>-0.052571773529052734</y>
        <z>8.09992504119873</z>
      </RegistrationClickCenter>
      <MarkerFilename>S_D1_Straumann_WN_048385_180.stl</MarkerFilename>
      <ImplantFilename>Q-650884-0.75_an.stl</ImplantFilename>
      <DisplayInformation>Tissue WN ø6.5 [Straumann® Metal SB 048.385]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueWN65StraumannMetalSB048385</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL650new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL650.stl</InterfaceFilename>
          <ScrewFilename>272024.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-D.stl</SupportFilename>
          <ScrewFilename>272020.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8107986450195313</x>
        <y>-0.10556888580322266</y>
        <z>7.4473438262939453</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>StraumannWN.stl</MarkerFilename>
      <ImplantFilename>Q-650884-0.75_an.stl</ImplantFilename>
      <DisplayInformation>Tissue WN ø6.5 [Straumann® Mono SB 048.169]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueWN65StraumannMonoSB048169</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>M-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>Mi-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>M-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>Mi-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>Z-STRTL650new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL650.stl</InterfaceFilename>
          <ScrewFilename>272024.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CONO H-1232-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>MBi-STRTL650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CONO H-1232-D.stl</SupportFilename>
          <ScrewFilename>272020.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-2.18499755859375</x>
        <y>0.00013256072998046875</y>
        <z>6.5982646942138672</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>Scan_Adapter_N1420.stl</MarkerFilename>
      <ImplantFilename>Q-650884-0.75_an.stl</ImplantFilename>
      <DisplayInformation>Tissue WN ø6.5 [Medentika® N 1420]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueWN65MedentikaN1420</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL650new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL650.stl</InterfaceFilename>
          <ScrewFilename>272024.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-D.stl</SupportFilename>
          <ScrewFilename>272020.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.899322509765625</x>
        <y>-0.0086727142333984375</y>
        <z>5.4994087219238281</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0.9889867264916723</x>
        <y>0.14800423920714678</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>50045_Intraoral.stl</MarkerFilename>
      <ImplantFilename>Q-650884-0.75_an.stl</ImplantFilename>
      <DisplayInformation>Tissue WN ø6.5 [DESS® 50.045]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueWN65DESS50045</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL650new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL650.stl</InterfaceFilename>
          <ScrewFilename>272024.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-D.stl</SupportFilename>
          <ScrewFilename>272020.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-0.020285129547119141</x>
        <y>1.6079788208007813</y>
        <z>9.9931097030639648</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0</x>
        <y>1</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>c19208.stl</MarkerFilename>
      <ImplantFilename>Q-650884-0.75_an.stl</ImplantFilename>
      <DisplayInformation>Tissue WN ø6.5 [ELOS® IO 4B-B]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueWN65ELOSIO4BB</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL650new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL650.stl</InterfaceFilename>
          <ScrewFilename>272024.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-D.stl</SupportFilename>
          <ScrewFilename>272020.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.9000015258789063</x>
        <y>-0.011011123657226563</y>
        <z>7.4262781143188477</z>
      </RegistrationClickCenter>
      <MarkerFilename>A-STR-SynOcta-T-L-WN-6.5.stl</MarkerFilename>
      <ImplantFilename>Q-650884-0.75_an.stl</ImplantFilename>
      <DisplayInformation>Tissue WN ø6.5 [Arum® B061_01]</DisplayInformation>
      <IsWithInterface>false</IsWithInterface>
      <Keyword>TissueWN65ArumB06101</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650new.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono</DisplayInformation>
          <Keyword>MetalNoRotNoCono</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRTL650no.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot No Cono (FAS)</DisplayInformation>
          <Keyword>MetalNoRotNoConoFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Z-STRTL650new.stl</SupportFilename>
          <InterfaceFilename>LINK-STRTL650.stl</InterfaceFilename>
          <ScrewFilename>272024.stl</ScrewFilename>
          <DisplayInformation>Zirk No Rot (Sly System)</DisplayInformation>
          <Keyword>ZirkNoRotSlySystem</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-C.stl</SupportFilename>
          <ScrewFilename>Vm-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTL650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTL650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>CONO H-1232-D.stl</SupportFilename>
          <ScrewFilename>272020.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>MUA SynOcta ø4.8 [NA AQ A062]</DisplayInformation>
      <Keyword>MUASynOcta48NAAQA062</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vz-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8989944458007813</x>
        <y>-0.0011887550354003906</y>
        <z>5.6996254920959473</z>
      </RegistrationClickCenter>
      <MarkerFilename>52.010_Intraoral.stl</MarkerFilename>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>MUA SynOcta ø4.8 [DESS® 52.010]</DisplayInformation>
      <Keyword>MUASynOcta48DESS52010</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vz-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.2000045776367188</x>
        <y>-0.025101959705352783</y>
        <z>6.3516559600830078</z>
      </RegistrationClickCenter>
      <MarkerFilename>A-STR-SynOcta-RN-4.8-MULTI.stl</MarkerFilename>
      <ImplantFilename>P-480884-0.55_an.stl</ImplantFilename>
      <DisplayInformation>MUA SynOcta ø4.8 [Arum® M202]</DisplayInformation>
      <Keyword>MUASynOcta48ArumM202</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZB-STRSYN480.stl</SupportFilename>
          <ScrewFilename>Vz-STRSYN480.stl</ScrewFilename>
          <DisplayInformation>Zirk Rot</DisplayInformation>
          <Keyword>ZirkRot</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>MUA SynOcta ø6.5 [NA AQ A139]</DisplayInformation>
      <Keyword>MUASynOcta65NAAQA139</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8989944458007813</x>
        <y>0.00057697296142578125</y>
        <z>5.5114407539367676</z>
      </RegistrationClickCenter>
      <MarkerFilename>52.048_Intraoral.stl</MarkerFilename>
      <DisplayInformation>MUA SynOcta ø6.5 [DESS® 52.048]</DisplayInformation>
      <Keyword>MUASynOcta65DESS52048</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8000030517578125</x>
        <y>-0.026731491088867188</y>
        <z>6.2459201812744141</z>
      </RegistrationClickCenter>
      <MarkerFilename>A-STR-SynOcta-WN-6.5-MULTI.stl</MarkerFilename>
      <DisplayInformation>MUA SynOcta ø6.5 [Arum® M203]</DisplayInformation>
      <Keyword>MUASynOcta65ArumM203</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vm-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRSYN650.stl</SupportFilename>
          <ScrewFilename>Vmi-STRSYN650.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ImplantFilename>Aq-350884_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø3.5 [NA AQ A1016]</DisplayInformation>
      <Keyword>MUASRA35NAAQA1016</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRMUA35.STL</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.5</x>
        <y>0.0020697116851806641</y>
        <z>7.6771955490112305</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>S_D4_Straumann_SRA35_0250080.stl</MarkerFilename>
      <ImplantFilename>Aq-350884_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø3.5 [Straumann® Metal SB 025.0080]</DisplayInformation>
      <Keyword>MUASRA35StraumannMetalSB0250080</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRMUA35.STL</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.5173797607421875</x>
        <y>-0.026429414749145508</y>
        <z>7.4075107574462891</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>S_D SRA35.stl</MarkerFilename>
      <ImplantFilename>Aq-350884_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø3.5 [Straumann® Mono SB 025.0000]</DisplayInformation>
      <Keyword>MUASRA35StraumannMonoSB0250000</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRMUA35.STL</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8990020751953125</x>
        <y>-0.0054836273193359375</y>
        <z>6.2520847320556641</z>
      </RegistrationClickCenter>
      <MarkerFilename>52.098_Intraoral.stl</MarkerFilename>
      <ImplantFilename>Aq-350884_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø3.5 [DESS® 52.098]</DisplayInformation>
      <Keyword>MUASRA35DESS52098</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRMUA35.STL</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.75</x>
        <y>-0.010054588317871094</y>
        <z>7.4005393981933594</z>
      </RegistrationClickCenter>
      <MarkerFilename>A-STR-SRA-3.5-MULTI.stl</MarkerFilename>
      <ImplantFilename>Aq-350884_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø3.5 [Arum® M237]</DisplayInformation>
      <Keyword>MUASRA35ArumM237</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRMUA35.STL</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vm-129h3.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA35.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA35.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ImplantFilename>AA-460824_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø4.6 [NA AQ A255]</DisplayInformation>
      <Keyword>MUASRA46NAAQA255</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.7494125366210938</x>
        <y>-0.026384174823760986</y>
        <z>5.2762842178344727</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>MarkerOS.stl</MarkerFilename>
      <ImplantFilename>AA-460824_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø4.6 [NA OneShot OS027]</DisplayInformation>
      <Keyword>MUASRA46NAOneShotOS027</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>MB-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>MBi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0</x>
        <y>0</y>
        <z>-5</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0.99912865006092288</x>
        <y>-0.041736562237898622</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>MarkerSR_5mm.stl</MarkerFilename>
      <ImplantFilename>AA-460824_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø4.6 [NA ScanReply SR255P]</DisplayInformation>
      <Keyword>MUASRA46NAScanReplySR255P</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0.12783432006835938</x>
        <y>1.6199951171875</y>
        <z>7.7891678810119629</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0</x>
        <y>1</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>S_D4_Straumann_SRA46_0250081.stl</MarkerFilename>
      <ImplantFilename>AA-460824_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø4.6 [Straumann® Metal SB 025.0081]</DisplayInformation>
      <Keyword>MUASRA46StraumannMetalSB0250081</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-0.030081748962402344</x>
        <y>1.7593994140625</y>
        <z>8.01254940032959</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0</x>
        <y>1</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>S_D SRA46.stl</MarkerFilename>
      <ImplantFilename>AA-460824_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø4.6 [Straumann® Mono SB 025.0001]</DisplayInformation>
      <Keyword>MUASRA46StraumannMonoSB0250001</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.2000045776367188</x>
        <y>0.0013666152954101563</y>
        <z>7.384181022644043</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>A-STR-SRA-4.6-MULTI.stl</MarkerFilename>
      <ImplantFilename>AA-460824_SRA_an.stl</ImplantFilename>
      <DisplayInformation>MUA SRA ø4.6 [Arum® M238]</DisplayInformation>
      <Keyword>MUASRA46ArumM238</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>M-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot</DisplayInformation>
          <Keyword>MetalNoRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Mi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal No Rot (FAS)</DisplayInformation>
          <Keyword>MetalNoRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vm-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRMUA46.stl</SupportFilename>
          <ScrewFilename>Vmi-STRMUA46.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>MUA Type 8° [NA AQ A1029]</DisplayInformation>
      <Keyword>MUAType8NAAQA1029</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MB-STRTYPE8.stl</SupportFilename>
          <ScrewFilename>Vm-STRTYPE8.stl</ScrewFilename>
          <DisplayInformation>Metal Rot</DisplayInformation>
          <Keyword>MetalRot</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>MBi-STRTYPE8.stl</SupportFilename>
          <ScrewFilename>Vmi-STRTYPE8.stl</ScrewFilename>
          <DisplayInformation>Metal Rot (FAS)</DisplayInformation>
          <Keyword>MetalRotFAS</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <InfoSignature>Not yet signed</InfoSignature>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename />
      <Signature />
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>