This coloured composite is suitable for dental prostheses with maximum wearing time of 2 years. It is based on polymethylmetacrylate and contains > 20% of ceramic fillers, which increases its strength.

Inorganic fillers (ceramic particles) are integrated into the resin matrix of organic plastic PMMA.

This solution brings an optimization of material properties such as strength, wear resistance, and advantages for dry or wet milling.

Multi-colour layering of breCAM.multiCOM provides the dental prosthesis with a natural chromatic scale.

  • Two-year wearing time
    • Optimal for temporary treatment as part of surgeries and longer regeneration phases. The prosthesis need not be replaced for 6 months, which leads to optimal healing results.
      Time and cost savings for both the patient and the dentist.
  • Polychromatic colouring
    • High-aesthetic temporary dental prostheses with low material costs.
      High level of acceptance by the customer, in particular as replacement for front teeth.
  • Monolithic treatment
    • Polychromatic colouring occurs within a single production process.
      High savings of various veneering materials and other working steps.
  • Crowns
  • Bridge with not more than 1 pontic
  • Inlays, onlays
  • Crowns bridges for implant work
  • A1
  • A2
  • A3
  • A3,5
  • B2
Framework design
Occlusal (strength) Cervical (strength) Pontics Front teeth Ø connector Side teeth Ø connector
≥ 1 mm ≥ 0,6 mm max. 1 ≥ 10 mm2 ≥ 15 mm2
Physical properties
E-modulus Flexural strength Water solubility Water absorption Residual monomer Wearing time
>2200 MPa > 100 MPa <0,8 μm/mm³ <20 μm/mm³ ≤ 0,7% 2 years